SMOOTHING PLANE
| Sizes | 245mm LENGTH | 45mm CUTTER |
|---|
Suitable for final finishing of cabinet work & general joinery work. Made from fine grained grey iron body castings for strength and stability, well balanced handle & knob for comfort & control. Cut iron made from high carbon steel enhance the attributes of this plane.
CORRUGATED BASE PLANE
SMOOTHING PLANE
| Sizes | 250mm LENGTH | 50mm CUTTER |
|---|
General purpose plane for workshop, site or fine finishing of high quality work. Fine grey iron castings machined and ground precision. Hardened carbon chrome steel cutter is adjustable for depth of cut and alignment .
JACK PLANE
| Sizes | 355mm LENGTH | 50mm CUTTER |
|---|
This plane is suitable for rapid stock removal when preparing timber prior to finish. Machined frog and cutter seating are to eliminate blade chatter. Best wooden handle and a special cap iron with hardened carbon chrome steel cutter.
FORE PLANE
| Sizes | 460mm LENGTH | 60mm CUTTER |
|---|
This plane is suitable for rapid stock removal when preparing timber prior to finish. Machined frog and cutter seating are to eliminate blade chatter. Best wooden handle and a special cap iron with hardened carbon chrome steel cutter.
JOINTER PLANE
| Sizes | 560mm LENGTH | 60mm CUTTER |
|---|
As its name implies this model is for truing up the edges of boards prior to jointing & planing out the hills & valleys of large timber or board. With same feature of planes in this range.
JACK REBATE PLANE
| Sizes | 330mm LENGTH | 50mm CUTTER |
|---|
This plane is suitable for general rebating work where heavy section is being cut. This plane is having all the features like other planes have in this range.
BLOCK PLANE SHEET METAL
| Sizes | 180mm LENGTH | 40mm CUTTER |
|---|
This block plane is economical very light & is easy to use for general purpose.
ELECTRICAL DIGGING POINTED BAR
ELECTIRCAL DIGGING POINTED BAR
| Sizes | 140MM, 35MM LENGTH | 180MM, 40MMCUTTER |
|---|
Block planes are light, handy, easy to use, mainly used when planing end grain and suitable for straight forward work where frequent adjustment is not essential.
BLOCK PLANE TWIN MOUTH
FENCING BAR ROUND / FENCING BAR HEX
| Sizes | 130MM LENGTH | 40MM CUTTER |
|---|
This plane has two mouth, can be used as block plane in its normal position and can be used as a bull nose plane by reversing cut iron & lever cap.
BLOCK PLANE
| Sizes | 150MM , 160MM LENGTH | 35MM , 40MM CUTTER |
|---|
Mainly used for end grain & plastic laminates. These block planes are fully adjustable and capable for fine accurate work. The Block Planes are low angle cutter seats at 13½0 & 210 with adjustable mouth.
CRAFTSMAN PLANE
| Sizes | 222MM LENGTH | 45MM CUTTER |
|---|
Light duty, easily and simply adjusted smoothing planes.
SPOKE SHAVE
| Sizes | 180 LENGTH | 45MM CUTTER |
|---|
Best tools for shaping chair legs and seats, curved templates and other kinds of curved works. Cutter depth is adjusted manually. Available in flat & round base.
SPOKE SHAVE (NON-ADJ.)
| Sizes | 250 LENGTH | 55MM CUTTER |
|---|
Best tools for chamfering and shaping, flat faced for convex surfaces and round faced for concave surfaces. Available in flat & round base.
SPOKE SHAVE (ADJUSTABLE)
| Sizes | 250 LENGTH | 55MM CUTTER |
|---|
Best tools for chamfering and shaping, flat faced for convex surfaces and round faced for concave surfaces. Fully adjustable for depth of cut and alignment. Available in flat & round base.
REBATE & FILLISTER PLANE
| Sizes | 215MM LENGTH | 38MM CUTTER |
|---|
A plane with two cutter positions, one for normal rebating works, and forward position as bull nose works.
SMOOTH PLANE(BRONZE BODY)
| Sizes | 250mm LENGTH | 50mm CUTTER | 1/12 BOX/ CTN. | 24.000 GR. WEIGHT |
|---|
Manganese Bronze Cast Bodied Plane have unique bedrock frog design. The blade is full 1/8" thick. Precisely fully ground. Knobs & handles are made from beech wood and polished.
PLOUGH PLANE
| Sizes | 200 MM LENGTH | 3,4,5,6,8,10,12,14,16 CUTTER | 1/9 BOX/ CTN. | 16.000 GR. WEIGHT |
|---|
This plane will plough nine size of grooves from 3 mm to 16 mm upto depth of 16 mm. Body and sliding section is made from unbreakable spheroidal graphite iron casting and a standard plough cut iron & supplied along with are made from selected high carbon steel. Comfortable bridge fence, can be used either sides of plane. Display Carton Packed.
ROUTER PLANE
| Sizes | 100 x 50 MM LENGTH | 6 MM CUTTER | 1/20 BOX/ CTN. | 6.000 GR. WEIGHT |
|---|
This Small router plane features a stout 1/4" sqaure blade and is perfect for small relief and shallow mortise work. optional 3/32 " square tipped and pointed blades for inlay work available. Display/carton packed.
SHOULDER PLANE
| Sizes | 150 MM LENGTH | 28 MM CUTTER | 1/12 BOX/ CTN. | 12.000 GR. WEIGHT |
|---|
This plane can be used as a shoulder , rebate or chisel plane. Two shims are provided for adjusting the mouth when used in conjunction with the bull nose or shoulder end piece. Shims are precision ground 1/32" and 1/64" Display carton Packed. Wooden posh box(optional)
SPOKE SHAVES (CONCAVE & CONVEX)
| Sizes | Convex, Concave LENGTH | 52 MM, 52 MM CUTTER | 1/40, 1/40 BOX/ CTN. | 1/40 GR. WEIGHT |
|---|
Spoke Shaves are made from virtually unbreakable spheroidal graphite iron. It has a concave blade with a curvature of 2-1/2" radius, used on curved surface, as ports & stair rails. The counte part has convex blade essential for recessed work and most useful for windsor chair makers .